PO PVC Joint

• Central bulb for absorbing structural movements
• High elasticity even at low temperatures
• High tensile and deformation resistance
• Resistance to aggressive chemical agents and groundwater
• Excellent durability and stability over time
• Resistance to UV rays and weathering
• Suitable for infrastructural applications

• Expansion and movement joints
• Concrete structures subject to deformation
• Dams, basins, and reservoirs
• Tunnels and underground works
• Wastewater treatment plants
• Canalization and hydraulic works
• Civil and industrial structures

Color

Black.

Appearance

Elastic PVC profile.

Storage

The product has no storage limitations if correctly stored.

Storage conditions

Store in original intact packaging, in a dry environment protected from weathering and heat sources.

Theoretical consumption

1 m per linear meter of joint

Application temperatures (substrate and environment)

Minimum -30°C | Maximum +70°C

Application

Drykos^® PO PVC Joint must be installed internally within the concrete pour, positioning the profile between two successive pours at the joint. The central bulb must be correctly aligned with the movement zone of the joint to allow for the absorption of structural deformations. The lateral fins must be completely embedded in the concrete. The profile should be secured using metal clips or ties to the reinforcement, ensuring stability during the pouring and vibration phases of the concrete. Connections between profiles must be made by heat welding, ensuring the perfect continuity of the waterproofing system.

Drykos^® PO PVC Joint section:

A = 2.0 mm
B = 4.0 mm
C = 25 mm
D = 30 mm
W = 150 mm; 250 mm; 320 mm

Other indications

• Install on correctly prepared and aligned substrates
• Ensure correct positioning of the bulb
• Avoid damaging the profile during installation
• Correctly perform welds between joints
• For anything not covered, contact Technical Support at +39 0171 1874992 or write to [email protected].

Safety

The product is classified as an article and, in accordance with Regulation (EC) No. 1907/2006 (REACH), does not require a Safety Data Sheet. During handling and use, it is nonetheless recommended to use appropriate personal protective equipment, such as gloves and protective eyewear, and to comply with the safety procedures established at the workplace.

Use

Product for professional use.

Should the product be defective, the liability of Drykos S.r.l. shall be limited solely to its replacement. The information and instructions in this technical data sheet regarding the application and end-use of the products are provided in good faith and reflect current scientific and technical knowledge; however, they do not constitute any guarantee or assumption of liability regarding the final outcome of the work involving their use. Given the variety of operating conditions and external factors beyond the control of Drykos S.r.l. during execution, it is the user's responsibility to verify the product's suitability for the specific application, assuming all risks and liabilities. Drykos S.r.l. reserves the right to modify the properties of its products at any time. Always refer to the most recent version of the product's technical data sheet. This edition cancels and replaces all previous versions. The latest updated technical data sheets are available on our portal at www.drykos.com.